Cartridge System / Powder Collection Booths

Powder Collection Booths
Typically used in batch and low to medium production applications, this booth features a cartridge filtration system using GFS’ designed and manufactured PC-100 module.

PC-100 - Collector Module

The PC-100 modules re-circulates clean, filtered air into the powder booth. The deluxe control panel features a Photohelic pressure gauge that monitors pressure drop and initiates the high-velocity pulse of air that is automatically injected into each filter sequentially. This means that you change filters less often.

Cartridge System / Powder Collection Booths

Standard Features:

Powder Collection Booth

• • White pre-coated galvanized steel panels

• • Energy efficient inside access light fixture(s)

• • Collector Module features high efficiency cartridge filters and air solenoid for filter maintenance    

• • Standard differential pressure gauge with a safety interlock for automatic shut down when air pressure exceeds its normal operating range

PC-100 Powder Module
Universal application with only one standard collector, featuring MAAVC (Manually Adjusted Air Velocity Controls).

• • 5 HP direct drive, 3-phase 208/230-460V motor with non-sparking fan

• • 6 cartridge filters with fast release mounting assembly

• • 4 final filters for additional protection in the workplace

• • The air supply requirements are 2.3 cfm @ 40 - 70 psig or 13.1 scfm

Cartridge System / Powder Collection Booths

Optional Configurations:

• • Fluidized bed for powder recovery (pump not included).

• • Conveyor openings

• • Booth extensions

• • Casters for the PC-100 Powder Module allowing the module to roll around or align on tracks

• • Additional powder modules can be purchased separately

Deluxe Control panel (UL listed) factory assembled, pre-wired and numbered with motor starter, fuse disconnect - on/off switch and a
solid-state timer for adjustments of sequential pulse cleaning

Cartridge System / Powder Collection Booths

Click on Image to Dowload PDF Brochure