Language > English | Espanol Follow us on:

Global Finishing Solutions

  • Features
  • Specifications
  • Optional Equipment
  • Brochure

Recirculating Spray Booths

recircbooth

 

recircbooth

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IHigh Quality Standards

The Re-circulating Paint Spray Booth is designed to meet the requirements of OSHA, NFPA-33, and HAP (Hazardous Air Pollutants).

 

NFPA-33 states: "A paint spray booth must provide adequate ventilation to control the concentration of flammable vapors below 25% of the lower explosive limit and it maintains the toxicity and permissible exposure limits below levels as stated in OSHA 1910.1000".

 

Design Performance and Benefits

This system dramatically reduces the amount of exhausted air. This is especially important if abatement is required by local authorities. In this case the air is rich in solvents and the volume sent to the abatement device is much lower. Abatement machinery is much more efficient when operating at higher concentrations of

exhaust gas.


Use of energy in paint booth is a serious concern in this era. Energy use is at a minimum when using a recirculation booth. At a recirculation ratio of 80:20% energy use is reduced by a factor of five. This is especially important when the booth is temperature and humidity controlled. Not only is energy use reduced greatly, but so

is capital expense because the equipment (air handling and abatement) is also reduced in size.

 

 

 

Recirculating Spray Booths

recircbooth

 

recircbooth

 

Construction Features
The re-circulation chamber is manufactured of heavy sheet steel, constructed of multiple modules for maximum performance and easy installation. Panels are made of 18-gauge sheet steel, pre-punched and companion flanged for easy nut and bolt assembly, providing a smooth interior surface.

 

 

Re-Circulation System
The system operates with a recirculation loop and an exhaust/fresh air loop. Both are separately controlled. The exhaust loop is controlled from an Auto-Balance system that maintains a constant pressure in the booth cabin regardless of filter loading. The fresh air system may also be controlled to provide a constant airflow. The recirculation loop is controlled by a Consta-Flow system that will maintain a constant airflow in the recirculation ducts regardless of filter loading.

 

All fan motors are controlled by variable frequency drives that change the fan motor speed as the filters load. The result is a booth with constant recirculation rate and a perfect booth balance with exhaust perfectly balancing the fresh air intake.

     
Sample Recirculating Booth with a Conveyor opening:

 

Automatic Spray Booths
Total Recirculating 16,000 cfm
Exhaust 4,000 cfm
Total air flow 20,000 cfm

 

recirc-auto

 

example:

By recirculating 16,000 cfm, this systems reduces exhaust
by 88%

 

 

Manual Spray Booths
Total Recirculating 5,000 cfm
Exhaust 3,000 cfm
Total air flow 8,000 cfm

 

recirc-manual

 

example:
By recirculating 5,000 cfm, this systems reduces exhaust
by 62.5%

 

Recirculating Spray Booths

recircbooth

 

recircbooth

 

 

 

 

 

 

 

 

 

 


GFS has over 35 years of experience in designing and manufacturing industrial booths. GFS will work with you to customize our booths to meet your specific requirements.

 

 

 

 

Recirculating Spray Booths

 

Click on Image to Download PDF Brochure

Content 5

 

 



 

Global Finishing Solutions - The World Leaders in Paint Booth Technology

12731 Norway Road • Osseo, WI • 54758